Supero SUPERSERVER AS-4021GA-62R+F User Manual page 89

5. Place a hard drive in the drive tray (see Figure 6-15).
6. Secure the hard drive to the tray using four screws.
Figure 6-15: Removing a Dummy Drive Tray
Drive Tray
7. Insert the hard drive into the chassis. To do this:
a. Press the hard drive release button to extend the drive tray handle.
b. Insert the hard drive into the chassis and close the handle to lock the hard
drive into place (see Figure 6-16).
Figure 6-16: Installing a Hard Drive
Chapter 6: Advanced Chassis Setup
6-15
SAS/SATA
Hard Drive