Supero SUPERSERVER AS-4021GA-62R+F User Manual page 63

Watch Dog Enable/Disable
JWD enables the Watch Dog function, a
system monitor that takes action when a
software application freezes the system.
Jumping pins 1-2 will have WD reboot the
system if a program freezes. Jumping pins
2-3 will generate a non-maskable interrupt
for the program that has frozen. See the
table on the right for jumper settings. Watch
Dog must also be enabled in BIOS.
TPM Support Enable
JPT1 allows the user to enable TPM (Trusted
Platform Modules) support to enhance data
integrity and system security. See the table
on the right for jumper settings. The default
setting is enabled.
VGA Enable/Disable
JPG1 allows you to enable or disable the
VGA port. The default position is on pins 1
and 2 to enable VGA. See the table on the
right for jumper settings.
SAS Enable/Disable
JPS1 allows you to enable or disable the
SAS controller. The default position is on
pins 1 and 2 to enable SAS. See the table
on the right for jumper settings.
LAN Enable/Disable
Change the setting of jumper JPL to enable
or disable the LAN Ethernet ports. See the
table on the right for jumper settings. The
default setting is enabled.
Chapter 5: Advanced Serverboard Setup
Watch Dog
Jumper Settings (JWD)
Jumper Setting
Pins 1-2
Pins 2-3
Open
Note: when Watch Dog is enabled, the user
must write their own application software to
disable the Watch Dog Timer.
TPM Enable/Disable
Jumper Settings (JPG1)
Jumper Setting
Pins 1-2
Pins 2-3
VGA Enable/Disable
Jumper Settings (JPG1)
Jumper Setting
Pins 1-2
SAS Enable/Disable
Jumper Settings (JPS1)
Jumper Setting
Pins 1-2
LAN Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
5-27
Defi nition
Reset
NMI
Disabled
Defi nition
Enabled
Disabled
Defi nition
Enabled
Defi nition
Enabled
(JPL)
Defi nition
Enabled
Disabled