Password-Control { Aging | Composition | History | Length } Enable - HP 5920 Command Reference Manual

network-operator
Parameters
user-name name: Specifies a user by its name, a case-sensitive string of 1 to 55 characters.
ip ipv4-address: Specifies the IPv4 address of a user.
ipv6 ipv6-address: Specifies the IPv6 address of a user.
Usage guidelines
With no arguments provided, this command displays information about all users in the password control
blacklist.
If an FTP or virtual terminal line (VTY) user fails authentication, the system adds the user to a password
control blacklist. You can use this command to view information about these users in the blacklist.
Users accessing the system through the console interface are not blacklisted, because the system is
unable to obtain the IP addresses of these users and these users are privileged and therefore relatively
secure to the system.
Examples
# Display information about users in the password control blacklist.
<Sysname> display password-control blacklist
Username: test
IP: 192.168.44.1
Blacklist items matched: 1.
Table 16 Command output
Field
IP
Login failed times
Lock flag
Blacklist items matched
password-control { aging | composition | history | length }
enable
Use password-control { aging | composition | history | length } enable to enable the password
expiration, composition restriction, history, or minimum length restriction function.
Use undo password-control { aging | composition | history | length } enable to disable a specific
password control function.
Login failures: 1
Description
IP address of the user.
Number of login failures.
Whether the user is prohibited from logging in:
•
unlock—Not prohibited.
•
lock—Prohibited temporarily or permanently, depending on the
password-control login-attempt command.
Number of user entries in the blacklist.
136
Lock flag: unlock