Installing The Driver - Sony PBD-D50 Operating Instruction

16

3 Installing the driver

Install the SCSI Miniport Driver and the DVD Driver
after connecting this unit with your PC. There are two
ways of installing the SCSI Miniport Driver; the
standard installation and the manual installation. The
following steps explain the standard installation. For
more details on the manual installation, refer to the
"Readme.txt" file in the supplied floppy disk.
Installing the SCSI Miniport Driver
1
Before inserting the SCSI PC card into your PC,
press POWER on this unit to turn the power on.
Remove the disc, if inserted into the drive.
2
Turn on the power of your PC.
3
After checking that the SCSI PC card and the unit
are connected correctry, then insert the SCSI PC
card into the PC card slot of your PC.
SCSI PC card
After the "New Hardware Found" window
appears, the driver is installed automatically. Go to
"Installing the DVD driver" (page 17).
If the "Insert a disk" window appears after "New Hardware
Found" window appears
1 Insert the supplied install disk into the floppy disk
drive of your PC, then click "OK."
2 Type "A:\WIN95\WIN95_AT" in "Copy from:," then
click "OK."
3 Follow the instructions on the screen to continue
installation.
4 When installation finishes, remove the install disk, then
restart your PC.
This unit