Chapter 12
Configuring RIP
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
Verifying RIP Configuration
To verify RIP configuration, use the following commands:
Command
show ip rip instance [instance-tag] [vrf
vrf-name]
show ip rip [instance instance-tag] interface
slot/port detail [vrf vrf-name]
show ip rip [instance instance-tag] neighbor
[interface-type number] [vrf vrf-name]
show ip} rip [instance instance-tag] route
[ip-prefix/lengh [longer-prefixes |
shorter--prefixes]] [summary] [vrf vrf-name]
show running-configuration rip
Displaying RIP Statistics
To display RIP statistics, use the following commands:
Command
show ip rip [instance instance-tag] policy
statistics redistribute {bgp as | direct |
{eigrp | isis | ospf | ospfv3 | rip}
instance-tag | static} [vrf vrf-name]
show ip rip [instance instance-tag]
statistics interface-type number] [vrf
vrf-name]
Use the clear ip rip policy command to clear policy statistics.
Use the clear ip rip statistics command to clear RIP statistics.
OL-20002-02
Purpose
Displays the status for an instance of RIP.
Displays the RIP status for an interface.
Displays the RIP neighbor table.
Displays the RIP route table.
Displays the current running RIP configuration.
Purpose
Displays the RIP policy status.
Displays the RIP statistics.
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
Verifying RIP Configuration
12-17