Skoda Bolero Owner's Manual page 32

MEDIA IN - input

Read and observe and
The device allows you to play audio files from an external, device connected to
the MEDIA-IN input.
External sources such as Apple devices, connected to the MEDIA IN input, can
be operated via your device.
Extension cables to connect external sources are available from ŠKODA origi-
nal accessories.
Sort tracks from a connected Apple device
›
Video (only available if a red adapter is used) - Video playlists, films, music
videos, TV shows, video podcasts, rented films.
›
Music - Playlists, artists, albums, tracks, podcasts, genres, composers, audio
books.
Video setup
›
Press the button →  → Video (iPod) button.

■ Screen – Adjust the brightness, contrast, and colour of the video (during
playback in NTSC standard - option for colour adjustment)
Format: - Set the screen width/height ratio
■
■ AV standard: - Video standard settings
1)
Automatic - Automatic selection of standard
■
PAL - Select the coding standard for the PAL colour signal
■
■ NTSC - Select the coding standard for the NTSC colour signal
1)
The same standard must be selected in the external source. An incorrectly adjusted AV standard can re-
sult in inadequate playback quality. The unit outputs no picture at all, or only renders it in black and
white.
30
Media
Fig. 20
MEDIA IN input
on page 26 first.
Note
Some of the operating options of the Apple device, such as the rating of
■
songs or the assignment of the title of an "on-the-go" playlists are not suppor-
ted.
Some of the operating options of the Apple device or the video playback are
■
supported only by using an extension cord marked in red.
After power cycling the ignition, the video playback will not be restored from
■
an Apple device.
For safety reasons, the video display is switched off at speeds over 5 km/h.
■
The unit continues to play the soundtrack.
Setting the volume control can be changed on the input sensitivity to the
■
MEDIA IN input » page 16, Sound setup.