Skoda Bolero Owner's Manual page 16

not recognizing a voice command

Read and observe on page 12 first.
If a voice command is not recognised, the system answers with Pardon? and
you can give a new command.
If the system does not recognise the second voice command, the help mes-
sage is provided again and you can give a new command.
If the system does not recognise the third voice command, the system plays
the Voice control cancelled message and the dialogue is ended.
override a voice command input

Read and observe on page 12 first.
A voice command can be corrected, modified or re-entered by briefly pressing
the button on the device or the symbol key  on the multifunction steer-

ing wheel. However, this is only possible if the icon  is displayed.
You do not have to wait until the voice command is recognized by the system.
stop/restore voice command input

Read and observe on page 12 first.
In some menus, the procedure for entering voice commands can be stopped by
turning the knob » Fig. 1 on page 5 .
2
The symbol displayed on the unit screen or in the information display then
changes from  on .
Restore entry
›
by pressing the function key with the symbol ;
›
by pressing the button on the device;

›
by pressing the symbol key  on the multifunction steering wheel.
14
Device operation
Voice commands not included in the Help

Read and observe on page 12 first.
Voice commands to call menus, folders and directories in each menu.
Function
Returning to the higher-level
Back
menu 
next page
previous page
Scroll through the menu /
list / directory
first page
last page
Voice command