Skoda Bolero Owner's Manual page 29

Requirements and Limitations

Read and observe and
The name of the artist, the album and the title of the played file can be dis-
played if the information is available as a so-called ID3 tag. If no ID3 tag is
available, only the folder name is displayed.
For good playback, we recommend, at a bit rate of at least 160 kb/s using com-
pressed MP3 files.
For audio files with variable bitrates, the indicated remaining playback time
does not correspond to the actual remaining playback time.
Files that are protected by Digital Rights Management (DRM) technology can-
not be played back by the device.
®
Bluetooth -player

Read and observe and
The device makes a wireless connection (pairing) to the Bluetooth
sible.
›
For connecting follow the same instructions as for pairing the device with a
telephone » page 34.
Note
We recommend adjusting the volume on the portable player to the maximum
■
level.
The volume can also be adjusted by setting the input sensitivity of the unit
■
®
for Bluetooth player » page 16, Sound setup.
The supported media functions are dependent on the type of Bluetooth
■
player used.
on page 26 first.
on page 26 first.
CD
Fig. 17 CD slot

Read and observe
The CD slot is located in the storage compartment on the passenger side ex-
ternal unit » Fig.
®
Inserting/ejecting a CD
player pos-
›
Insert a CD, with the labelled side facing up, into the CD slot until it is auto-
matically drawn in. Playback starts automatically.
›
Press the symbol button  – the CD is ejected.
If the ejected medium is not taken out within 10 seconds, it will be retracted
again for safety reasons. However, the unit will not change to the CD source.
WARNING
The CD/DVD player is a laser product.
■
On the manufacturing date, this unit was classified as a class 1 laser prod-
■
® uct in accordance with the national/international standards
DIN EN 60825-1: 2008-05 and DHHS Rules 21 CFR, Subchapter J classed as a
class 1 laser product. The laser used in this class 1 laser product is so weak
that there is no risk of danger when operated correctly.
This product is designed so that the laser is restricted to the inside of the
■
unit. However, the installed laser could be classified in a higher class were
the housing to be removed. For this reason, never remove the housing of
the unit.
and on page 26 first.
17.

27
Media