Skoda Bolero Owner's Manual page 15

Note
During voice control, no traffic announcements are played.
■
Some voice commands must be spelled out when pronouncing depending on
■
the selected language of communication, such as the Source Selection "SD"
card one.
Switching on/off
Fig. 9 Multifunction steering wheel

Read and observe on page 12 first.
Switching on voice control
›
Briefly press the button on the device.

›
Briefly press the symbol key 
Activation of voice control is indicated by an acoustic signal and the device
screen will display a collection of basic voice commands for the current menu.
The menu display as well as the acoustic signal can be enabled or disa-
bled » page 17 .
Switching off voice control
›
Press the button on the device for a long time or press it twice.

›
With a long or double press of the symbol key  on the multifunction steer-
ing wheel.
›
Touch the screen with your fingers (any part of the screen with the excep-
tion of the function key ).
›
Press a button on the device (except for a short pressing of the
›
Utter the voice command Cancel voice control.
on the multifunction steering wheel.
1

Help for voice control

Read and observe
Start introduction
When you give the voice command Start tutorial, the unit plays one of the sev-
en parts of the voice control tutorial.
Individual parts of the introduction can be called separately by issuing the
voice command introduction part ... and the number 1 through 7.
Help
When you give the voice command Help, the unit displays a menu containing
possible context dependent voice commands. In some cases issuing the voice
command help again will cause another section of the help to be shown with
further possible voice commands in a menu.
The help does not contain all possible commands.
Operation

Read and observe
The voice control system can usually be operated through the method "say
what you see."
Speak the descriptions of the green highlighted function keys out loud. For ex-
ample, the function key Dial no. can be accessed through the voice command
"Call number."
Voice control settings
Icons in the voice control menu
a voice output is played

a voice command is awaited

a voice command entry is stopped

a voice command is recognized

As long as the system is playing a voice output, it is not necessary to await the
end of the message playback. The message can be ended by briefly pressing
button).
the button or the symbol key  on the multifunction steering wheel. In

this way the voice output is aborted and a new voice command is expected.
on page 12 first.
on page 12 first.
» page 17.
» page 14
13
Device operation