Tape - Play; Loading A Tape; Playing A Tape - Aiwa DBX-DS55/DS50 Operating Instructions Manual

Tape – Play

Loading a tape

1
Press Z PUSH on the unit.
2
Load a recorded/recordable tape into
the cassette holder.
With the side you want to
play/record facing forward.

Playing a tape

You can use TYPE I (normal) tape.
For DBX-DS55/DS50/DS33/DS30
1
Load a tape.
2
Press TAPE (or FUNCTION repeatedly)
to switch the function to TAPE.
3
Press PLAY MODE repeatedly to select
"g" to play one side. Select "h" or
*
"j" to play both sides.
* The tape deck stops automatically after
repeating the sequence 5 times.
4
Press N (or nN on the unit).
The tape starts playing. Press the button
again to play the reverse side.
For DBX-DS22/DS20/DS11/DS10
1
Load a tape.
2
Press TAPE (or FUNCTION repeatedly)
to switch the function to TAPE.
3
Press N.
The tape starts playing.
Other operations
To Do this
Press x.
Stop play
Press X. Press again to resume
Pause
play.
Press m or M.
Fast-forward or
rewind
Press Z PUSH on the unit in stop
Remove a tape
mode.
Note
Do not eject the tape during playback or recording, as
this may cause irreparable damage to the tape and
cassette holder.
Tip
When a tape is inserted, corresponding forward (N)/
reverse (n) indicators light. The reverse indicator
lights up only for DBX-DS55/DS50/DS33/DS30.
GB
17