Operation; Adjusting Cutting Angle - Echo HCAA-2400A Operator's Manual

12
O
PERATION

ADJUSTING CUTTING ANGLE

WARNING
Never adjust cutting assembly with engine running.
WARNING
Hedge clipper blades are sharp. Always wear gloves when
adjusting cutting assembly.
WARNING
DO NOT stand hedge clipper on end when adjusting cutting
angle, otherwise serious injury may result
1. Place unit on a flat clear area. Assure stop switch is in the
"STOP" position.
2. Pull out indexing ring, and turn ¼ turn to lockout position.
3. Turn hedge clipper ¼ turn so that indexing ring faces downward.
4. Release hand-guard blade lock with right hand, while holding
blade-adjustment handle with left hand.
5. Rotate blades to desired cutting position.
6. Turn indexing ring ¼ turn to lock blade in place.
WARNING
Gear case assembly becomes HOT during use. Always grip
assembly at blade-adjustment handle when making cutting
angle adjustments, otherwise serious injury may result.
Indexing ring
¼ turn
Hand-guard blade lock
Hand-guard
blade lock
Adjustment
handle