Context Menu; Touch Operation - Siemens SINUMERIK 840D sl Operating Manual

Note
Input order for functions
When using the square root or squaring functions, make sure to press the "R" or "S" function
keys, respectively, before entering a number.
2.4.9

Context menu

When you right-click, the context menu opens and provides the following functions:
● Cut
Cut Ctrl+X
● Copy
Copy Ctrl+C
● Paste
Paste Ctrl+V
Program editor
Additional functions are available in the editor
● Undo the last change
Undo Ctrl+Z
● Redo the changes that were undone
Redo Ctrl+Y
Up to 50 changes can be undone.
2.4.10

Touch operation

If you have an operator panel with a touch screen, you can perform the following functions
with touch operation:
Grinding
Operating Manual, 05/2017, A5E40869190
- OR -
Press the "Calculate" softkey.
- OR -
Press the <INPUT> key.
The new value is calculated and displayed in the entry field of the calcu‐
lator.
5. Press the "Accept" softkey.
The calculated value is accepted and displayed in the entry field of the
window.
Introduction
2.4 User interface
47