Figure 1.15 Iscsi 10Gbit/S (10Gbase-T) Interface, Iscsi 1Gbit/S Interface (Installed In A Controller); Figure 1.16 Sas Interface (Installed In A Controller) - Fujitsu ETERNUS DX100 S4 Basic Operation Manual

Chapter 1 Component Names and LED Names
1.1 Controller Enclosures
●
iSCSI 10Gbit/s (10GBASE-T), iSCSI 1Gbit/s
The ports on the host interface are used for connecting a controller to a server with a LAN cable. This port
uses an RJ-45 connector.

Figure 1.15 iSCSI 10Gbit/s (10GBASE-T) Interface, iSCSI 1Gbit/s Interface (Installed in a Controller)

1
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
●
SAS 12Gbit/s
The ports on the host interface are used for connecting a controller to a server with a SAS cable. This port
uses a miniSAS HD (SFF-8644) connector.

Figure 1.16 SAS Interface (Installed in a Controller)

1
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
3
2
2 3
Copyright 2017 FUJITSU LIMITED
6
5
4
5 6
4
25
P3AM-7662-09ENZ0