Figure 1.20 Fc Interface (Installed In A Controller); Figure 1.21 Host Interface For Fc Cable Connection (Installed In A Controller) - Fujitsu ETERNUS DX100 S4 Basic Operation Manual

Chapter 1 Component Names and LED Names
1.1 Controller Enclosures
●
FC
The ports on the host interface are used for connecting a controller to a server with an FC cable. This port
uses a Dual LC connector.

Figure 1.20 FC Interface (Installed in a Controller)

4
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
●
FC, iSCSI 10Gbit/s (10GBASE-SR), FCoE, Ethernet 10Gbit/s (for FC Cable Connection)
The ports on the host interface are used for connecting a controller to a server with an FC cable. This port
uses a Dual LC connector.

Figure 1.21 Host Interface for FC Cable Connection (Installed in a Controller)

1
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
5 6
2 3
Copyright 2017 FUJITSU LIMITED
1
3
2
5 6
4
30
P3AM-7662-09ENZ0