Speakers - HP Pavilion x360 15 Maintenance And Service Manual

Speakers

Description
Speakers (includes cables and 3 rubber isolators)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
5. Remove the battery (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board
2. Release the display speaker cable from the retention clips (2) built into the base enclosure.
3. Remove the four Phillips PM2.0×5.5 broad head shoulder screws (3) that secure the speakers to
the base enclosure.
4. Remove the speakers (4).
IMPORTANT:
Failure to properly install or damage to these isolators can result in degraded speaker performance.
Reverse this procedure to install the speakers.
Keyboard/top cover on page
Battery on page
When removing the speakers, make note of the location of the four rubber isolators (5).
30).
Component replacement procedures
Spare part number
924538-001
24).
37