Omron HJ-203 Instruction Manual page 15

CHECKING THE DISPLAY
ABOUT THE ENERGY SAVING
FUNCTION
In order to save energy, the display of the unit
will be turned off after "SLEEP" is displayed
if no buttons are pressed for more than
5 minutes. However, the unit will continue to
monitor your step count.
Press ,
again.
CASES WHERE THE UNIT MAY
NOT BE ABLE TO COUNT STEPS
ACCURATELY
Incorrect unit position
• When the front of the unit is placed at an
angle of less than 60° (shown below) or
horizontal to the ground.
Approx. 30°
Approx. 60°
NOTE: The unit can count steps even if it is
or
slanted or placed upside-down, or if
the main unit is perpendicular to the
ground.
to turn the display on
Approx. 30°
Approx. 60°
13