Advertisement
Quick Links
These instructions are intended for use only by experienced professionals in the automotive
customizing business. Special tools and equipment, as well as specialized handling and care
of product during installation, may be required. Before beginning this installation, carefully read
through the following instructions.
Materials/ Tools required for this installation:
1. #2 Phillips screwdriver
3. 3/8" drill bit
5. Awl or similar tool
INSTALLATION INSTRUCTION # 44-0027A
INSTALLATION INSTRUCTIONS
50-0263x-001 SERIES 1181310
50-0263x-018 SERIES 1181315
50-0263x-019 SERIES 1181320
CHEVROLET S-10 BLAZER
VIDEO CASSETTE PLAYER HOUSING
MATERIALS PROVIDED FOR INSTALLATION:
FOR
2. Powered screwdriver or drill with adapter
4. Razor knife or similar
6. Audiovox VCP (AVP- 7180 or equiv.)
Jan. 21, 1999
Printed in the U.S.A
Advertisement
Related Manuals for Audiovox 50-0263x-001 SERIES
Summary of Contents for Audiovox 50-0263x-001 SERIES
- Page 1 50-0263x-001 SERIES 1181310 50-0263x-018 SERIES 1181315 50-0263x-019 SERIES 1181320 CHEVROLET S-10 BLAZER VIDEO CASSETTE PLAYER HOUSING 2. Powered screwdriver or drill with adapter 4. Razor knife or similar 6. Audiovox VCP (AVP- 7180 or equiv.) Jan. 21, 1999 Printed in the U.S.A...
- Page 2 ITEM Description SCREW, # 8 X 1 1/2" PWH SCREW, # 8 X 3/4" PPH VCP MOUNTING BRACKET HOUSING TOP HOUSING BOTTOM INSTALLATION INSTRUCTION # 44-0027A Jan. 21, 1999 Printed in the U.S.A.
- Page 3 REMOVE AND DISCARD (2) TWO SCREWS WHICH SECURE BRACKET TO HOUSING. SEPARATE HOUSING TOP FROM HOUSING BOTTOM. FIGURE 1 2. Carefully drill a 3/8" hole in location previously marked. CAUTION: Drill through plastic only, do not drill through sheet metal brace behind plastic.
- Page 4 4. Remove and discard (4) four screws from the side of VCP. Partially install (4) four #8 x 3/4" screws (item 2 pg 2). See Figure 4. FIGURE 5 6. Carefully position housing top (item 4 pg 2) on VCP and slide VCP rearward until housing contacts plastic panel.
- Page 5 FIGURE 7 8. Install housing bottom (item 5 pg 2) and secure to bracket by inserting clips into slots and pressing firmly. Make sure contour of housing matches floor of vehicle prior to securing clips. Figure 8. FIGURE 9 7. Make all necessary wiring connections to VCP. Check function of VCP and video system.