Bultaco brinco User Manual
  1. Manuals
  2. Brands
  3. Bultaco Manuals
  4. Scooter
  5. brinco
  6. User manual

Bultaco brinco User Manual

Hide thumbs Also See for brinco:
Table of Contents

Advertisement

Quick Links

See also: User Manual
USER MANUAL
THE
ELECTRIC
MOTO-BIKE

Advertisement

Table of Contents
loading

Related Manuals for Bultaco brinco

Summary of Contents for Bultaco brinco

  • Page 1 USER MANUAL ELECTRIC MOTO-BIKE...
  • Page 2 Welcome bultaquista First of all, thank you for buying a Brinco. We are proud to have The Welcome Kit of your new Brinco contains the items listed your confidence. The new Brinco is a new, reaching and offering below: concept, the Moto-Bike that you will enjoy in a way you have never dreamed of before.

  • Page 3: User Manual

    In this manual we will give you advice and warnings so you can take full the technical data, maintenance services, colors, design, equipment advantage of your Brinco and keep it as good as new. That is why we and the vehicle materials.

  • Page 4: Table Of Contents

    3.3.1 Starting card / Wristband copy 1.1. General warnings 3.4. During the ride 1.2. Operational Safety 3.5. Gear shift / Transmission 1.3. Warnings 3.6. Stopping your Brinco 1.4. Power Components’ location 3.7. Instructions for Use 3.8. Directions for Parking 2. VEHICLE DESCRIPTION 4. MAINTENANCE 2.1.
  • Page 5 GENERAL SAFETY...

  • Page 6: General Warnings

    OR OTHER PARTIES. IF ANY ABNORMALITY DAMAGE ON THE BATTERY IS DETECTED, PLEASE Your Brinco is not a competition vehicle and it is not designed for such use. Thus, its use in CONTACT YOUR BULTACO MOTORS OFFICIAL DISTRIBUTOR. competition will mean the loss of the warranty provided by Bultaco Motors S.L.
  • Page 7 If it is not working properly, it switches off The malfunction of the brake lever indicates a danger condition regularly and if it does not work properly, repair it at a Bultaco and other hazards. Do not use this type of device with charger.
  • Page 8 If you notice any damage to the front fork or it does not work if the plastic parts are not cleaned well with water, a mild detergent smoothly, it must be checked or repaired by a Bultaco Motors The original Moto-Bike, driver and accessories can never exceed can be diluted in it.

  • Page 9: Power Components' Location

    VEHICLE HAS BEEN SWITCHED OFF. Their handling (except for assembly / disassembly and charging the battery and engine disconnection to handle the rear wheel) must only be carried out by a Bultaco Motors Official Service. Any damage to any of the power components must be repaired immediately by a Bultaco...
  • Page 10 VEHICLE DESCRIPTION...

  • Page 11: Presentation

    Moto-Bike with a spectacular, very sporty and beautiful result. From the first time you see a Bultaco Brinco it is clear that it is something new and uncomparable to everything we knew before. Its features might ressemble those of a competition...

  • Page 12: Location Of Components

    There is also the option to purchase a Low Seat sub- chassis that allows you to further reduce the seat height. Ask Retractable side stand to your Bultaco Motors Official Distributor. Power Cell Li-Ion Matrix Battery [See section 3.2.] Battery Connector [See section 3.2.1.]...

  • Page 13: Handlebar Controls

    Check the brake position properly. The rear brake lever is on the left handlebar grip. Throttle control Always make sure that the accelerator returns correctly to its initial position when you release it after accelerating before switching ON your Brinco. Specific element for homologated version.

  • Page 14: Dashboard

    Speedometer (km/h - mph) Warning Indicator [See section 2.5.] [See section 2.5.] This light flashes when you turn on your Brinco and testing Driving mode. ECO - SPORT - TOUR is being performed. Once testing has finished, the light will [See section 2.5.]...

  • Page 15: Dashboard Configuration

    2.5. Dashboard Configuration COMMUTATION KM/H - MPH CHANGING DRIVING MODE ODOMETER - TRIP 1- TRIP 2 SUMMARY OF FEATURES This option can be changed by pressing the “MODE” button Press the “MODE” ECO MODE TOUR MODE SPORT MODE DASHBOARD BUTTONS for more than 4 seconds until the display shows ODO –...

  • Page 16: Power Control Button

    Once the cruise power is selected it will be set and displayed on the dashboard display - PRESSING ANY OF THE DO NOT CHANGE ANY OF THE IDENTIFICATION NUMBERS OF until Power Control is turned off. YOUR BRINCO NOR BREAK THEIR SAFETY SEALS, OTHERWISE YOU BRAKE LEVERS WILL LOSE YOUR WARRANTY.

  • Page 17: Technical Specifications

    2.8. Technical Specifications BRINCO R BRINCO R-E BRINCO C BRINCO S BRINCO R BRINCO R-E BRINCO C BRINCO S Brushless / Permanent magnets / AC / On rear wheel Handlebars Sport – 760 mm Touring – 730 mm Motor Built-in self-protection and diagnostic system Front brakes Hydraulic - Disk Ø...

  • Page 18: Dimensions

    2.9. Dimensions BRINCO R BRINCO R-E BRINCO C BRINCO S Release angle Width 768 mm 738 mm Wheelbase 1.200 mm 1.189 mm Length 1.856 mm 1.854 mm 1.846 mm SUBCHASSIS STANDARD: Max 1.164,2 - Min 1.061 mm SUBCHASSIS STANDARD: Max 1.114,2 - Min 1.011 mm Seat height SUBCHASSIS LOW SEAT: Max 1.140,2 - Min 1.011 mm...
  • Page 19 GENERAL OPERATION...

  • Page 20: Prior Checks

    Check the battery charge level on the dashboard. [See section 2.4] To make sure your Brinco is ready for use, you must perform the following checks: If after reading these instructions you still have questions, contact your Bultaco Motors Official Dealer, who will be happy to help.

  • Page 21: Battery Charge

    3.2. Battery Charge Connect the Bultaco original charger to the battery and the power outlet (240 V AC 50Hz / 110 V AC 60Hz). Remember ALWAYS CHARGE THE BATTERY BEFORE REMOVING THE BATTERY TO REASSEMBLE THE BATTERY, IF YOU WANT TO CHARGE YOUR BATTERY WITHOUT REMOVING IT FROM...
  • Page 22 AND THEN DISCONNECT THE BATTERY CHARGER. MAXIMUM BATTERY PERFORMANCE WILL In order to optimize the battery life and safety, when the Brinco is not in use for more than NOT BE ACHIEVED UNTIL YOU HAVE 90 days, we recommend: MADE AT LEAST 5 CYCLES OF CHARGE Once the charger is connected, the charging process starts automatically after 15 AND DISCHARGE.
  • Page 23 Time failure Regulating failure 10-14 Final charge / charge conservation Temperature failure TROUBLESHOOTING Error number Procedure 1, 2, 3, 4 Check battery and battery wiring 6, 11-13 Ask for the charger to be checked at your Bultaco Motors Official Service...
  • Page 24 BRAZALET PROVIDED. KEEP THE MASTER CARD IN A SAFE PLACE O CON UNA SEGUNDA TARJETA. 2. When you turn the system on your Brinco will perform a test and an intermittent warning light will flash on the dashboard. Clarification: If the power button is ON, the warning light will be illuminated permanently and you must...

  • Page 25: Starting Card / Wristband Copy

    IF THE PERFORMANCE DEMAND EXCEEDS THE PHYSICAL LIMITS OF THE BRINCO, We will provide you with a Brinco Master card. This card allows you to make up to 10 card/ from the engine incorporated into the rear wheel. THE POWER WILL BE TEMPORARILY wristband copies.

  • Page 26: Gear Shift / Transmission

    OF THE BULTACO MOTORS NETWORK. performance you need at all times. equipped with it). Interchangeably, you can disable your Brinco by placing your card or wristband on OVERDRIVE - LOW RANGE GEARBOX CASSETTE the front of the dashboard until the dashboard turns off.

  • Page 27: Riding Instructions

    If the warning light flashes, remember to reduce the level of performance demand and assist the Brinco by pedaling before the When riding, the electrical components are subjected to maximum demand that will light becomes a continuous one, which is when the self-protection system disconnects the power.
  • Page 28 MAINTENANCE...

  • Page 29: Adjusting The Rear Suspension: Shock Absorber

    Towards + Increases compression (hard) Towards - Decreases compression (soft) Do not try to remove the shock absorber. Visit a Bultaco Motors Official Service if it does not operate normally. Damage caused by misuse or removal will void the warranty.

  • Page 30: Adjusting The Front Suspension: Fork

    4.2. Adjusting the front suspension: Fork Rebound adjustment valve Preload adjustment nut The front fork compresses under load and rebounds to recover its entire length. The RUNNING-IN PERIOD: 20 HOURS OF RUNNING-IN ARE REQUIRED FOR A NEW rebound dampening (or bounce) is the setting that determines how quickly or slowly the FORK, IT WILL RUN MORE SMOOTHLY fork rebounds.

  • Page 31: Brakes

    T25 Torx brakes and wheels skid the output, you must go be cleaned with a special to your Bultaco Motors brake detergent or with wrench so that you can put with ease. Bear in mind that your finger’s first phalanx...

  • Page 32: Wheels And Tyres

    Make sure that the spoke tension is correct since that can cause unstable behavior. cable connections SUGGESTED PRESSURE: BRINCO R / R-E / C: 1,8 BAR front – 2,2 BAR rear FOR YOUR OWN SAFETY GO TO A BRINCO S: 2,2 BAR front – 2,5 BAR rear BULTACO MOTORS OFFICIAL SERVICE Check that all spokes are tight.
  • Page 33 Disassembles the rear side mirror. Unscrew the Allen M5 screws in the handlebar. Remove the rear side mirror assembly from the handlebar. Turn your Brinco upside down and place the seat and handlebars on a flat surface. Place BE CAREFUL BECAUSE AS YOU REMOVE...
  • Page 34 - DO NOT REMOVE THE WHEEL IMMEDIATELY AFTER A JOURNEY: THE ENGINE GETS HOT AND YOU COULD GET BURNT. YOUR BRINCO IS TURNED OFF. DISCONNECTED. - THE HEX WRENCH SUPPLIED BY BULTACO IS FOR EMERGENCY USE IN CASE OF A PUNCTURE DURING A JOURNEY. REAR WHEEL DISASSEMBLING REAR WHEEL DISASSEMBLING...

  • Page 35: Transmission: Chain And Bottom Bracket

    4.5. Transmission: Chain and Bottom Bracket 4.6. Washing Regular cleaning of your Brinco is recommended to extend its lifespan and to ensure proper performance. GOOD You must be careful not to damage any of the components. In order to do so we...

  • Page 36: 4.8. Maintenance Table

    TORX BOLT M4x0,7x12 ISO-14581 INOX A2 3.5-4 Sealed * You must always use the original Bultaco spare parts, as well as the grease recommended by the manufacturer. You must carry out every manteinance service recommended by Bultaco Motors S.L. If you do not follow them in the indicated dates, you will lose your warranty.

  • Page 37: Troubleshooting

    TROUBLESHOOTING...
  • Page 38 5.1. Troubleshooting In spite of the fact that each Brinco has been carefully inspected prior to leaving the factory, there may be circumstances beyond our control that may cause some kind of failure. In the event that your Brinco suffers a problem, we have provided the following indications...
  • Page 39 5.2. The Ultimate Brinco 5.3. Tips from our riders Power Control: Overdrive: Dual traction: On this sample route, on Power Control lets you maintain Use the Overdrive when riding at Although the pedaling and motor which you cover a variety constant power, always providing the higher speeds.
  • Page 40 bultaco.com...

Table of Contents