Table of Contents
Advertisement
Disassembly and Reassembly > Disassembly
(13) LCD Circuit Board, Backlight, LCD Unit , and LCD Case B (Fig. 5-3-15)
LCD Circuit Board (a)
1) Unsolder the two points on LCD circuit board.
2) Disconnect the flat cable from LCD circuit board.
3) Remove screw [H], and then remove the LCD circuit board.
Backlight (b), LCD Unit (c), and LCD Case B (d)
4) Release the two tabs on LCD frame (e), and then remove the LCD frame from LCD case B.
5) Remove the backlight and LCD unit from LCD case B.
Note:
The LCD unit and backlight are precision components: Take great care when handling them.
Subjecting them to impact could result in a fault.
(d)
[G] M1.7×3 (Gold)
Fig. 5-3-15 LCD Circuit Board, Backlight, LCD Unit , and LCD Case B
(c)
(b)
2-1
2-1
2-2
5 - 13
4
(e)
(a)
(a) LCD Circuit Board
(b) Backlight
(c) LCD Unit
(d) LCD Case B
(e) LCD Frame
1
3 [G]
2
Advertisement
Table of Contents
