Step And Ramp Modes; Select Step Or Ramp Mode; Auto Storage Of Settings - Fluke 712B User Manual

Step and Ramp Modes

Select Step or Ramp Mode

The Product allows you to set Step and Ramp modes for
easier check of points within the linear range in output
mode.
To set the Step or Ramp mode:
1. Push .
2. Use  and  to select Step mode and Ramp mode.
The  or  icon shows on the Product display
accordingly.
This function is only available when Source
mode is selected.
Note

Auto Storage of Settings

The Product automatically stores the latest settings,
including the temperature unit, the linear range of mA
converting to temperature, and sensor type.
Every time you turn on the Product, it automatically
applies the last settings.
RTD Calibrator
Step and Ramp Modes
23