Using Autodial Delay - Siemens OpenStage 60 User Manual

Step by Step

Using autodial delay

A number is automatically dialed after a set delay start-
ing from the entry of the number's last digit. The auto-
dial delay can be used:
• when dialing in idle mode
• when deflecting an incoming call
• when setting up a consultation call
• when transferring an answered call.
The delay can be reduced by performing one of the fol-
lowing activities:
i
• pressing the
• lifting the handset. This only works if the phone
number was entered when the phone was idle or if
it was entered for a consultation call when the hand-
set was off hook.
• pressing the loudspeaker key. This only works if the
phone number was entered when the phone was
idle and the loudspeaker key was not lit or if the
phone number was entered for a consultation call
and the loudspeaker key was not lit.
If an emergency number is preset by your ser-
vice personnel, the autodial delay for this phone
number is reduced to one second.
Settings for autodial delay
The setting does not affect automatic emergency
number dialing.
You should only change this function if you are using a
dial plan (programmed by your service personnel). If this
function is enabled, you have a choice of two setting:
• Autodial delay
• Immediate dialling
If you select Autodial delay, you must either confirm
the "Dial" option, press the loudspeaker key or wait until
the autodial delay expires to set up a call when dialing
with the handset on hook.
If Immediate dialling is set, your call is automatically dialed
as soon as the string entered matches an entry in the
dial plan.
Enhanced phone functions
key. This always works.
67