4-2-1. Display of Previously Detected Error Codes
When the DSR-2000/2000P detects an internal abnormality, the error code is memorized in EEPROM.
(Excluding error code 9X-XXX)
A maximum of 8 error codes detected previously, starting from the latest error code, can be displayed.
How to display the error code
1. While pressing the [DELETE], [+], and TRIM [+]
keys, press the [MENU] key.
2. Move the cursor to SERVICE SUPPORT so that the
letters are highlighted using the [AUDIO|IN],
[VIDEO|IN] keys, then press the [ENTRY] key.
3. Move the cursor to ERROR LOG so that the letters are
highlighted using the [AUDIO|IN], [VIDEO|IN]
keys, then press the [ENTERY] key.
The display changes as shown to the right, and the
error log appears.
DSR-2000/2000P
MA I NTENANCE MENU
MENU DATA CONTROL
SERVO CHECK
SERVO ADJUST
TAPE PATH ADJUST
ELECTR I CAL ADJUST
SERV I CE SUPPORT
OTHERS
MA I NTENANCE MENU
MENU DATA CONTROL
SERVO CHECK
SERVO ADJUST
TAPE PATH ADJUST
ELECTR I CAL ADJUST
SERV I CE SUPPORT
OTHERS
MA I NTENANCE MENU
SERV I CE SUPPORT
ERROR LOG
MANUAL EJECT
D I AGNOST I CS CONTROL
MA I NTENANCE MENU
SERV I CE SUPPORT
ERROR LOG
ERROR-08-03A
ERROR-02-674
ERROR-02-603
ERROR-08-03A
ERROR-02-674
ERROR-02-603
4-2. Error Codes
4-5