Channel Setup - Philips DVD740VR Owner's Manual

DVD740VR 4/12/02 12:08 PM
26 Channel Setup (cont'd)
Reviewing Memorized Channels
To see which TV channels the DVD/VCR has memorized, follow
the steps below.
Before you begin, place the DVD/VCR in VCR mode. Press
OUTPUT SELECT so the green VIDEO light appears on the
front of the DVD/VCR. Press VCR/TV so the green VCR/TV
light appears on the front of the DVD/VCR.
1
Press VCR, then press DISC/MENU.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press PLAY B (o) or STOP C (p) to select TUNER
SET UP, then press FF g (B).
SELECT op CHOOSE B
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
2ND AUDIO
TO END PUSH EXIT
3
Press PLAY B (o) or STOP C (p) to select CH
MEMORY REVIEW, then press FF g (B). A list of
memorized channels will appear on the screen.
If all the memorized channels don't fit on the screen, press
FF g (B) to see the remaining channels. Then press REW
h (s) to return to the first screen of channels.
If you do not press any buttons within 10 seconds, you
will either go to the next screen of channels or you will
return to the previous menu.
4
Press DISPLAY/STATUS/EXIT once or twice to
exit.
Page 26
ON
MARKER
SETUP AUDIO SUBTITLE
REC/OTR REPEAT
CHANNEL/SKIP
CLEAR
TITLE MODE
1
OUTPUT SELECT
DVD
DISC
MENU
2,3
STOP
REW
PAUSE
1
2 3
4 6
5
7 8 9
+ 10
0
SEARCH MODE DISPLAY ZOOM
TIME SEARCH STATUS/EXIT
POWER
ANGLE
REPEAT
A-B
RETURN
VCR
OK
PLAY
FF
TIMER SET
VCR/TV
MEMORY
SPEED
SLOW
4