Morphy Richards TOTAL CONTROL Instructions Manual page 18

Blueberry and Oat Breakfast Smoothie (made with Natural Yogurt)
3 portions
Preparation time: 5 minutes
Program time: 2 minutes
Ingredients:
• 675g
• 325ml
• 45g
• 115g
• 2 tbsp
Method:
1 Place all ingredients into the Removable Vessel (7) and stir with a wooden spoon.
2 Fit the Lid (4) select Drinks Function (17) and press the Start/Stop Button (23).
FAQ's?
If you have any questions about the use of your Total Control
Soup Maker, check the list below where we have answered
some of the more common frequently-asked-questions (FAQ's).
If you require further help, please contact our Helpline:
0344 871 0944.
Does the heating function work when I remove the Lid (4)?
No. Removing the Lid cuts the power to the unit for maximum
safety. The heating function only activates when you have
placed on the Lid (4) and selected either Smooth (13), Medium
(14), Chunky (15), Sauté (16) or Reheat (18) soup programs.
Can I remove the Lid mid-cycle?
The Total Control Soup Maker will allow you 1 minute in the
cycle to add any missed ingredients and enable you to stir
during Sauté (16).
Can I use my Soup Maker to make anything other than soup?
No. The available programs are set to make perfect soup and
drinks from scratch. Follow the recipes and adapt them to your
own taste.
Can I use raw meat in soup recipes made in my Soup Maker?
Aside from bacon or small amounts of fine minced meat (100g),
no. You should first cook meat separately before transferring
into your Soup Maker with additional ingredients from your
recipe, as your Total Control Soup Maker is only designed to
gently Sauté (16) bacon or onions, then heat the soup.
WARNING: You should not use the sauté function to brown
raw meat, other than bacon or minced meat (100g max).
What is the capacity of my Soup Maker?
The capacity of your Total Control Soup Maker is 1600ml. This is
marked on the inside and outside of the Removable Vessel (7).
Ensure you do not fill your Total Control Soup Maker above this
line, otherwise the overfill detector will cut the power to the
Serrator Blade (8) and the LED screen (21) will display 'E1'. If
this happens, simply remove some of your ingredients so the
1600ml fill mark is not exceeded and wipe clean the Over Fill
Sensor (5) on the Lid (4). Ensure your ingredients (including
liquid) are above the 2 portions line, failure to do this will impair
the blending function.
18
4 portions
5 minutes
2 minutes
800g low fat natural yogurt
400ml semi skimmed milk
60g rolled oats
150g blueberries
3 tbsp clear honey
Can I change the times on the Smooth, Medium and Chunky
soup settings?
No. The times for these settings are preset.
Can I reheat tinned/carton soup?
No. The programs are set to make perfect soup from scratch.
Tinned or soup in cartons whilst convenient could burn to the
base of the element causing damage to the product.
What if my Total Control Soup Maker stops working?
Your Total Control Soup Maker is fitted with a safety thermostat,
which cuts the power and stops the product from working to
prevent overheating if it is used continuously on 3 or more
cycles. If this happens, remove any food from the Removable
Vessel and allow the Total Control Soup Maker to cool for 30
minutes, before continuing.
If the Blend Function (19) is used continuously for more than 20
seconds a safety cut out will cut the power to prevent
overheating. When this happens wait for 10 seconds before
reusing the Blend Function (19).
Can I make cold soups like Gazpacho in myTotal Control
Soup Maker?
Yes, but you will first need to cook the soup using either the
Smooth (13), Medium (14) or Chunky (15) soup setting. Then
simply allow to cool or refrigerate before enjoying.
What if food burns on the base of my Total Control Soup
Maker?
Due to the starch and sugars present in some foods, a slight
burning may occur if they are placed in direct contact with the
inside base of the Removable Vessel. To prevent this, add half a
cup of water or stock to the Total Control Soup Maker before
placing in any solid ingredients. Then top up with the remaining
liquid specified in your recipe.
Cancelling or changing programs
If you have selected a program incorrectly and the Start/Stop
Button (23) has been pressed,
or you want to cancel the program, simply press the Start/Stop
Button (23) and hold for 2 seconds. Press the Mode Button (22)
to select the correct program and press the Start/Stop Button
(23) to restart.