Chapter 3 Installation Scenarios; Overview; Telco Cables; Figure 3-1 Installation Overview - ZyXEL Communications VES-1012 Hardware Installation Manual

This chapter details how to connect VDSL wiring to MDFs based on your existing telephone wiring
3.1

Overview

The following figure gives an overview of an installation. Data and voice signals can coexist on the same
telephone lines as the VES-1012 has built-in splitters.
You can also attach RJ-11 connectors to the Telco cable and connect directly to a P841 VDSL
modem(s) or patch panel. This chapter discusses connections using MDFs.
3.2

Telco Cables

Telco cables are used for data and voice applications with MDFs (Main Distribution Frame), patch panels and
distribution boxes. They can also be used as extension cables. Telco cables are typically made up of 25 or 50
twisted-pair copper cables.
Connect a Telco connector to one end of the cable (see Appendix B) and connect the other end directly to an MDF;
alternatively attach RJ-11 connectors and connect directly to VDSL modem(s).
Installation Scenarios
Installation Scenarios

Figure 3-1 Installation Overview

VES-1012 Hardware Installation Guide
Chapter 3
infrastructure.
3-1