Auto Diagnostic / Auto Diagnotics - Toshiba B-EX4 Maintenance Manual

5. SYSTEM MODE
5.3.2 Auto Diagnostics/AUTO DIAGNOSTICS
The printing procedure of "AUTO DIAGNOSTIC" of "DIAG." is same as 「5.3.1 Counter,
MAINTENANCE COUNT」.
The manu layer from top menu of system mode to AUTO DIAGNOSTICS is below.
MENU ITEM
System Mode / SYSTEM MODE
<1>Diagnostics / <1>DIAG.
Auto Diagnostics / AUTO DIAGNOSTIC
If error occur during printing, the error message is displayed, the error LED turns on and the onlineLED
turns off. The erro can be canceled by [ENTER], [CANCEL] or [MODE] key, but printer did not perform
re^printing.
•
AUTO SELF DIAG. PRINT CONTENTS
PROGRAM B-EX4T1-T
FONT
KANJI
EEPROM 256B
SDRAM
SENSOR1 00000000,00000111
SENSOR2 [H]23 ﾟ C [A]22 ﾟ C
HEAD
EXP.I/O NG
EX.232C NG
RFID
WLAN
RTC
USB MEMORY NG
BASIC M Z-SX4-MV10F. V1.0F:7479
BASIC S Z-SX4-SV10E. V1.0E:AD36
Print method / PRINT TYPE
Thermal transfer / TRANSFR
Direct thermal / DIRECT
Cut setting / CUT TYPE
Disable / OFF
Enable / ON
Print / CHECKING & PRINT
MAIN XXXXXXXXX V1.0A:1A00
BOOT XXXXXXXXX V1.0 :8500
HTML XXXXXXXXX V1.0 :6100
5600
NONE :0000
NONE :0000
32MB
[R]4.2V [T]2.5V [E]0.6V
[RANK]7
OK #00RV972 (EU0) R01
OK Ver1.1.3
MAC 00-11-22-33-44-55
NG
305DPI
5-16
EO18-33027
5.3 SELF-DIAGNOSTIC TEST
Parameter/