Safety; Safety Observations; Repair Observations - Siemens EH70650 Repair Instructions

1

SAFETY

1.1

Safety observations

Danger!
All repairs must be performed by factory technical personnel.
All inadequate repairs may cause injury to users.
The housing and frame may be subject to voltage in the event of
failure.
The appliance must be disconnected from the power grid before being
disassembled. In its interior, there are parts under high voltage.
Always use a circuit breaker if testing while under power is necessary.
The ground connection must not exceed standardised values. It is of
utmost importance for personal safety and operating the appliance.
After any repair, VED 0701 tests must be performed, or specific
country rules must be followed.
The power supply cord can only be replaced by technical service
personnel and using the replacement cable.
Special observations for induction appliances!
The induction appliances comply with all safety rules and
electromagnetic compatibility rules in force. People with pacemakers
implanted must abstain from using or repairing this appliance. It is
possible that the appliance could interfere with operation of an
implant.
People who use hearing aids may note disturbances.
206_58300000105199_ara_en_h – 15.03.a
1.2

Repair observations

Caution!
Never try to repair by indiscriminately exchanging components.
Proceed systematically, and consider the technical documentation of
the appliance.
The electronics boards must not be repaired. They must be replaced
with original parts. All exceptions are documented separately.
Components sensitive to electrostatic discharges:
Respect the EGB reference ("General Repair Manual")
Sharp Edges:
Use protective gloves!!
Seite 3 von 66