Time format
Setting
Summer- / wintertime
changeover
Setting
Building Technologies
HVAC Products
4
General settings
4.1
Time of day and date
4.1.1
Operating principle
The controller has a yearly clock with time of day, weekday and date.
The following time formats are available:
Time
Date
format
24 hours
dd.mm.yyyy
(day.month.year)
am / pm
mm / dd / yy
(day/ month/ year)
Main menu > Commissioning > Settings > ... or
Main menu > Settings > Device
Operating line
Time format
Main menu > Time of day/date
Operating line
Time of day
Date
Year
The change from summertime to wintertime, and vice versa, is made automatically. The
date of the earliest changeover can be readjusted should the relevant regulations
change.
The dates set for the change from wintertime to summertime, and vice versa, ensure
that on the first Sunday after that date, the time of day will change from 02:00 (winter-
time) to 03:00 (summertime), and from 03:00 (summertime) to 02:00 (wintertime).
If both dates are set to coincide, summer- / wintertime changeover will be inactive.
Main menu > Time of day/date
Operating line
Summer time start
Winter time start
4.1.2
Communication
For the time of day, there are several sources available, depending on the master
clock. This can be entered on the controller. Time of day and date can be exchanged
via bus.
For clock time operation, the following settings can be made:
• Autonomous (does not send and does not receive)
• Clock time from the bus: Clock time slave (receives the synchronization signal from
the bus)
• Clock time to the bus: Clock time master (sends the synchronization signal to the
bus)
Modular Heating Controller RMH760B
4 General settings
Example
Time of day
31.05.2006
hh:mm
(hours: minutes)
05/ 31/ 2 0 06 hh:mm am/pm
(hours: minutes am/pm)
Range
24 hours / 12 hours
(am/pm)
Range
00:00...23:59
01.01...31.12
2000...2100
Range
01.01. ...31.12
01.01. ...31.12
Example
15:56
03:56 PM
Factory setting
24 hours
Factory setting
00:00
01.01
2000
Factory setting
25.03
25.10
39/238
CE1P3133en
05.02.2007