Bowflex BXE326 Assembly And Owner's Manual page 53

Condition/Problem
Unit rocks/does not sit level
Foot pedals loose/unit difficult
to operate
Drive train click/tick noise once
per full crank revolution
Knocking sound during machine
operation
Squeaking noise that appears a
few minutes into a workout and
normally will get progressively
worse as the workout continues
Console continuously displays
a different program every 15
seconds
Workout results will not sync
with Bluetooth enabled device
®
Workout results not posting to
Bowflex Connect™
Workout results not posting
from Bowflex Connect™ to
MyFitnessPal account
®
Things to Check
Check leveler adjustment
Check surface under unit
Hardware
Check crank/pulley assembly
Check foot assemblies, leg as-
semblies, handlebar
assemblies
Check for loose hardware
Check hardware at junction
between Lower Handlebar Arm
and Pedal
Bolt that connects the swing
arms to the axle running through
the console mast
Roller squeaking on rail
Console is in demonstration
mode
Current console mode
Total time of workout
Fitness machine
Bluetooth enabled device
®
Fitness App
Fitness App on Bluetooth
®
enabled device
Sync accounts
Sync fails
Assembly / Owner's Manual
Adjust levelers until machine is level.
Adjustment may not be able to compensate for extremely uneven surfaces.
Move machine to level area.
Tightly secure all hardware on the Pedal Arms and Handlebar Arms.
Disconnect left and right foot assemblies and rotate crank. If sound persists,
replace crank/pulley assembly. If sound does not come from rotating crank,
check foot assemblies and upper/lower handlebars.
Manually move foot, leg, and handlebar assemblies to isolate sound. Re-
place part making sound.
Tightly secure all hardware on the Stabilizers and the base of the Console
Mast.
Make sure that the alignment tab on the Pivot Sleeve goes into the slot in the
hole. Be sure the Pivot Sleeve extends through the opposite hole in the joint
cover.
Loosen pivot rod bolt slightly until noise goes away. White lithium grease can
also be applied for a temporary fix. Contact your local distributor for assis-
tance.
Apply silicone lubricant to a dry cloth and wipe the rails to eliminate roller
noise.
Push and hold down the ENTER and PAUSE/ENTER buttons for 3 seconds.
Machine must be in Idle Mode to sync. Push the PAUSE/STOP button until
the Power-Up Mode screen is displayed.
A workout must be longer than 1 minute to be saved and posted by the
Console.
Unplug unit from electrical outlet for 5 minutes. Reconnect to outlet.
Consult your device to be sure that the Bluetooth
enabled on it.
Review Specifications of Fitness App and confirm your device is compatible.
Contact your local distributor for further assistance.
Workout results transfer from the machine to the App, and then post to the
Bowflex Connect™ website. Review account and password for the Bowflex
Connect™ website.
Contact your local distributor for further assistance.
From the Menu icon on the Bowflex Connect™ website, select the Sync to
MyFitnessPal .
®
Review account and password for MyFitnessPal
Contact your local distributor for further assistance.
53
Solution
wireless feature has been
®
.
®