Setup; Installing The Battery (Replacing) - Lifescan OneTouch SS Xpress Instructions For Use Manual

This section describes how to setup the OneTouch StatStrip
Xpress Glucose Hospital Meter. The operator can set the
meter for local time and date, have the beeper On or Off,
enable the sample counter, and set the date display format.

Installing the Battery (Replacing)

The meter is powered by a single 3V coin cell battery.
Install/Replace the battery as follows:
1. Remove the back battery cover on the meter.
2. Install the coin cell battery with
the + side facing up. (If replacing
the battery, remove the used bat-
tery and replace with a new one.)

Setup

31