1.Back view as Fig.1
2.remove the base
- Step 1: Place the monitor face down on a smooth surface as Fig 2.
Be carefully to prevent the scratch and injury during the uninstallation.
Step 2: Unfasten one screw on the base stand as Fig 3.
Step 3: Firmly insert the base removal tool into four-pronged clicks as Fig 4
Step 4: Pull out the foot from base as Fig 5 Fig.6.
Base Column
Base Column
Base stand
Base stand
Mechanical Instructions
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
3. Remove cable base as Fig7 and Fig.8
Unscrew the screws
Fig.7
4.Remove back cover as Fig.9 and Fig.10
Unscrew the 2 screws and open the clicks on the sides
5.Remove the shielding
-Unscrew the screws and then pull down the shielding as Fig.11 Fig.12
17
200WP7 LCD
Go to cover page
Fig.6
Fig.8
Fig.9
Fig.10
Fig.12