Technical Specifications For The Pm-E F Pp 24 Vdc Profisafe - Siemens PM-E F pm DC24V PROFIsafe Installation And Operating Manual

7.3.6

Technical Specifications for the PM-E F pp 24 VDC PROFIsafe

Overview
Dimensions and Weight
Dimensions W x H x D (mm)
Weight
Data for Specific Module
Number of outputs
•
Assigned address area
•
•
Length of cable
•
•
Maximum achievable safety class
•
Fail-safe performance characteristics
•
•
•
Voltages, Currents, Potentials
Rated supply voltage L+
•
•
•
•
Total current of the relay output
•
•
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
Relay outputs (PP switching)
In the I/O area for inputs
In the I/O area for outputs
Unshielded
Shielded
according to IEC 61508, according to EN 954,
according to ISO 13849
Low demand mode (average probability of
failure on demand)
High demand/continuous mode (probability of
a dangerous failure per hour)
Acceptance ID
permissible range **
Power loss ride-through of L+
Power loss ride-through of internal P5
Reverse polarity protection
Horizontal installation
– Up to 40 °C
– Up to 55 °C
– Up to 60 °C
Vertical installation
– Up to 40 °C
7.3 PM-E F pp DC24V PROFIsafe power module
Technical Specifications
30 x 81 x 52
Approx. 80 g
1
5 bytes
5 bytes
200 m, maximum
200 m, maximum
SIL3, category 4, PLe (for conditions see
modulePM-E F pp DC24V PROFIsafe")
SIL3
< 1.00E-05
< 1.00E-10
FM, cULus, CE, C-Tick
24 VDC
20.4 V to 28.8 V
None
5 ms
No
10 A
8 A
7 A
8 A
Fail-Safe Modules
"Power
93