1
Prepare the AC power adaptor.
2
Connect one end of the AC adaptor to the DC IN socket
on the main unit.
3
Connect the other end of the AC adaptor to the wall outlet.
Set time and date
1
In standby mode, press and hold TIME SET/AUTO SCAN for
2 seconds.
»
The hour digits are displayed and begin to blink.
2
Press TUNING +/- to set the hour.
3
Press TIME SET/AUTO SCAN to confirm.
»
The minute digits are displayed and begin to blink.
4
Repeat steps 2-3 to set the minute, year, month, day and
12/24 hour format.