Siemens SCALANCE W788-1PRO Operating Instructions (Compact page 89

LED Color
P1 Yellow
Green
Flashing yellow
Yellow/green
Flashing green
L2 Green
R1 Yellow
Green
Flashing green
Green flashing
quickly
Green 3 x fast ,1
x long flashing
Flashing yellow
Yellow/green
R2 Yellow
Green
Flashing green
SCALANCE W788-xPRO/RR / SCALANCE W74x-1PRO/RR
Operating Instructions (Compact), Release 08/2007, A5E00413342-05
Meaning
Data transfer over the Ethernet interface (traffic).
There is a connection over the Ethernet port. (Link)
PRESET-PLUG detected.
PRESET function completed successfully.
"Flashing" enabled over PST.
Power supply over the hybrid connector X1 (PoE or
energy contacts).
Data transfer over the first WLAN interface.
W788-xPRO/RR in access point mode:
The WLAN interface is initialized and ready for operation.
W788-xPRO/RR in client mode or W74x-1PRO/RR:
There is a connection over the first WLAN interface.
W788-xPRO/RR in access point mode:
The channels are being scanned.
W788-xPRO/RR in client mode or W74x-1PRO/RR:
The client is searching for a connection to an access point or ad hoc
network.
W788-xPRO/RR in access point mode:
With 802.11h, the channel is scanned for one minute for primary users
before the channel can be used for data traffic.
W788-xPRO/RR in client mode or W74x-1PRO/RR:
The client waits for the adopt MAC address due to the setting <Auto Find
Adopt MAC> and is connected to no access point.
W788-xPRO/RR in client mode or W74x-1PRO/RR:
The client waits for the adopt MAC address due to the setting <Auto Find
Adopt MAC> and is connected to an access point.
PRESET-PLUG detected.
PRESET function completed successfully.
W788-xPRO/RR in access point mode:
Data transfer over the second WLAN port.
W788-xPRO/RR in client mode or W74x-1PRO/RR:
The LED is always off because the 2nd interface is not available in client
mode.
W788-xPRO/RR in access point mode:
The WLAN interface is initialized and ready for operation.
W788-xPRO/RR in client mode or W74x-1PRO/RR:
The LED is always off because the 2nd interface is not available in client
mode.
W788-xPRO/RR in access point mode:
The channels are being scanned.
W788-xPRO/RR in client mode or W74x-1PRO/RR:
The LED is always off because the 2nd interface is not available in client
mode.
Description
2.4 LED displays
83