Description
2.3 Different properties for devices with other hardware
Antennas
The following antennas are approved for use with the SCALANCE devices listed above. You
can select an antenna in Web Based Management or in the Command Line Interface.
CLI menu: CLI\INTERFACES\WLAN1\ADVANCED> (or \WLAN2\ADVANCED)
Command
anttype [0...n]
Compatibility
You can also use configuration data of one of the devices listed above for a SCALANCE
W788-xPRO/RR or W74x-1PRO/RR with a different order number from that shown in the
table above.
Admin password for the USA variant
The default password is also "admin" for the USA variant if you have selected "admin" as the
user name.
78
Description
Specify an antenna type.
0
User-defined
1
ANT795-4MR (default
antenna) - gain: 3 dBi (2.4
GHz) 5 dBi (5 GHz)
2
ANT795-6MR (incl. 5 m cable)
- gain: 3 dBi (2.4 GHz) 4 dBi (5
GHz)
3
ANT792-8DR with 5 m cable -
gain: 10 dBi (2.4 GHz)
4
ANT792-8DR with 10 m cable
- gain: 6 dBi (2.4 GHz)
5
ANT792-8DR with 15 m cable
- gain: 3 dBi (2.4 GHz)
6
ANT793-8DR with 5 m cable -
gain: 14 dBi (5 GHz)
7
ANT792-4DN (RCoax
antenna) - gain: 4 dBi (2.4
GHz)
8
ANT793-4MN (RCoax
antenna) - gain: 6 dBi (5 GHz)
9
RCoax cable - gain: 0 dBi (2.4
GHz) 0 dBi (5 GHz)
SCALANCE W788-xPRO/RR / SCALANCE W74x-1PRO/RR
Operating Instructions (Compact), Release 08/2007, A5E00413342-05
Comment
To display the list, enter
"anttype ?".