Chapter 4. Ibm Flex System V7000 Storage Node Initial Configuration - IBM Flex System V7000 Introduction And Implementation Manual

IBM Flex System V7000 Storage
Chapter 4.
Node initial configuration
This chapter provides the initial configuration steps of the IBM Flex System V7000 Storage
Node. Before the actual installation and the initial configuration, proper planning is important.
We also present an overview of the planning tasks and refer you to the appropriate
documentation as needed to enable you to complete these tasks.
To help you get started and guide you to a successful installation and initial configuration of
your IBM Flex System V7000 Storage Node system, the following topics are described:
Planning and Installation requirements
Initial setup with IBM Flex System Manager Node and IBM Flex System Chassis
Management Module
Setup Wizard for initial configuration
System Management
Service Assistant
© Copyright IBM Corp. 2013. All rights reserved.
4
149