Table of Contents
Advertisement
Table 20. Ports on the utility node (continued)
Item
Feature
number
5
PSU 1
6
USB connector (for
service use only)
7
USB connector (for
service use only)
8
BMC display port
9
Management port
10
SSR port
11
VGA port
12
PSU 0
Unpacking the IBM Storage Scale System Utility Node (IBM SSR task)
Before you unpack a utility node, ensure that you reviewed and followed all the related instructions.
The utility node and related parts are shipped preinstalled in the enclosure:
• The utility node comes preinstalled with the following components:
– One AMD EPYC 7003 Series Processor
– Two PSUs
– Two power wire mounts
– Two US power cord
– One lithium battery
– Six 60*60*38 mm fans
– One chassis
– One top lid
– One left riser bracket C
– One left riser bracket D
– One processor battery
– One TPM
– Two M.2 latches
– Two SSDs
– DDR4 DIMMs (depends on the order)
– Network adapters (depends on the order)
– Interface cables (if ordered)
• Rack rails kit and screws
• Cable Management Arm (CMA) kit
• One location map label
Note: You might need a box knife to unpack the utility node.
CAUTION: To lift the assembled enclosure, two persons are required unless a suitable lifting
equipment is available or the enclosure is unpacked and dismantled as described in the procedure.
Description
Provides power supply to the system.
Provides for keyboard connection.
Reserved for service.
Provides one RJ45 1 GbE port for BMC connection.
Provides one RJ45 10 GbE port for management or campus
connection.
Provides one RJ45 10 GbE port for SSR connection.
Provides a video connection to the BMC.
Provides power supply to the system.
Chapter 4. Installing 61
Advertisement
Table of Contents
