ZyXEL Communications GS1920 User Handbook Manual page 78

17. Host PC should show "Additional information is needed to connect to this
network".
18. Enter the username (vlan20) and password (vlan20user) which must be
consistent with the RADIUS server's user profile settings.
19. Go to Windows command prompt and type "ipconfig /all". The IP address
should be assigned to the VLAN 10 network (192.168.20.X).
20. Host PC can ping Server-2 connected to port 11 of Core Switch with the IP
192.168.20.100.
Note:
Only the Zyxel enterprise switch models can support Dynamic VLAN
Assignment. Smart managed switches do not support the 802.1x attributes
necessary for Dynamic VLAN Assignment
www.zyxel.com
78/100