2. Go to Advanced Application > VLAN > VLAN Configuration > Static VLAN
Setup, to create VLAN 20 for Host. Active the VLAN 20 and type the
Name and VLAN Group ID then select the Fixed on Port 2 and Port 10 and
remove TX Tagging on Port 2.Click Add.
Figure 2, Advanced Application > VLAN > VLAN Configuration > Static VLAN
Setup
3. Go to Advanced Application > VLAN > VLAN Configuration> VLAN Port
Setup, to configure PVID 20 for Port 2. Click Apply.
Figure 3, Advanced Application > VLAN > VLAN Configuration> VLAN Port
Setup
www.zyxel.com
57/100