11. Host PC should show "Additional information is needed to connect to this
network."
12. Enter the username (vlan10) and password (vlan10user) which must be
consistent with the RADIUS server's user profile settings.
13. Go to Windows command prompt and type "ipconfig /all". The IP address
should be assigned to the VLAN 10 network (192.168.10.X).
14. Host PC can ping Server-1 connected to port 10 of Core Switch with the IP
192.168.10.100.
15. Disconnect Host PC from port 1 of Core Switch.
16. Reconnect the Host PC to port 1 of the Core Switch.
www.zyxel.com
77/100