ZyXEL Communications GS1920 User Handbook Manual page 22

1. Check the Active box to activate the features. Choose which Ethernet-type to
configure. Fill in the VID number that has been created on the static VLAN.
Then click Add to save the configuration.
Figure 2 Advanced Application > VLAN > VLAN Configuration > Protocol-based
VLAN
Verify
1. Click the Index number to check & edit the configuration.
Figure 3 Advanced Application > VLAN > VLAN Configuration > Protocol-based
VLAN
2. The MAC Address of the device should be listed in the MAC table with the
specified VID group number configured by client.
Figure 4 Management > MAC Table
www.zyxel.com
22/100