Alignment And Adjustments - Samsung HLR4677WX/XAA Service Manual

2. Alignment and Adjustments

2-1 When Entering Service Mode:
2-1-1 Service Mode Entry Method
1. Turn off the power to make the SET STAND-BY mode.
2. In order to enter the Service Mode, Press "Mute" → "1" → "8" → "2" → "POWER" button on the Remote Control.
In case entry into SERVICE MODE is unsuccessful, repeat the procedures above.
2-1-2 Initial DISPLAY State in times of SERVICE MODE Switch overs
2-1-2(A) OSD DISPLAY
Factory
DDP1011(L5)
DNIe
ADV7402(M)
ADV7402(S)
uPD64083
MSP4440
CCA
Cinema CCA
SP Actuator
CHECKSUM
OPTION
SERVICE
T_RoboAUS0_XXXX
20XX_XX_XX
T-DTVUCOM5-XXXX
T-RoboAUS1_XXXX
2-1-2(B) BUTTONS OPERATIONS WITHIN SERVICE MODE
MENU
Direction keys ▲ / ▼
Direction keys ◀ / ▶
Source
Samsung Electronics
0000
Full Menu Display / Move to Parent Menu
Item Selection by Moving the Cursor
Data Increase/Decrease for the Selected Item
Cycles through the active input source that are connected to the unit
Alignment and Adjustments
2-1