Samsung HLR4677WX/XAA Service Manual page 32

Alignment and Adjustments
2-15 Rear Panel Jacks
Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top
Box and a DVD player etc., because there are two sets of video input jacks and two sets of component video input jacks on the
rear panel of your TV. For more information, please see "Connections".
ANTENNA terminals
①
Two independent cables or antennas can be connected to these
terminals. Use "Cable IN" and "Air IN" terminals to receive a
signal from VHF/UHF antennas or your cable system. Use the
"Cable OUT" terminal to send the signal being received by the
"Cable IN" terminal out to another component (such as a Cable
Set-Top Box).
S-VIDEO INPUT jacks
②
Connects an S-Video signal from an S-VHS VCR or DVD player.
DVI (Digital Video Interface) AUDIO INPUT jacks
③
Connect to the digital audio output jacks of a device with DVI
output.
VIDEO/AUDIO INPUT jacks
④
Connect video/audio signals from external sources, such as VCR
or DVD players.
VIDEO/AUDIO OUTPUT jacks
⑤
Sends video/audio signals from the TV to an external source,
such as a VCR. These jacks are available only in RF, Video and
S-Video modes.
2-28
Component1, 2 jacks (Y, P
⑥
Use these jacks to connect the component video/audio signals
from a DVD player or a Set-Top Box.
DIGITAL AUDIO OUT(OPTICAL) jack
⑦
Connect to a Digital Audio Component.
Anynet
⑧
Please refer to the Anynet Owner's Instruction.
HDMI (High Definition Multimedia Interface)/
⑨
DVI INPUT jack
Connect to the HDMI jack of a device with HDMI output.
Connect to the digital video output jack for device with DVI
output.
CableCARD™
⑩
Insert the CableCARD into the slot.
SERVICE
⑪
This jack is for repair and software upgrades.
, P , L, R)
B R
Samsung Electronics