Selecting The Mode; Memory Mode; Call Channel Mode - Icom ID-4100A Basic Manual

Dual band transceivers
Hide thumbs Also See for ID-4100A:
Table of Contents

Advertisement

3
BASIC OPERATION

■ Selecting the Mode

D VFO mode
You use the VFO mode to set the operating frequency.
D Memory mode
You use the Memory mode to operate on Memory channels.
D Call channel mode
You use the Call channel mode to operate on the Call
channels.
1.
Push [V/M] several times until you enter the VFO or

Memory mode.

• In the Memory mode,
number are displayed.
Information
L
• Pushing [V/M] toggles between the VFO and Memory modes.
• To enter the Call channel mode, hold down [CALL] for 1
second.
• In the Call channel mode, "144 C0," "144 C1," "430 C0," or
"433 C1" is displayed.
• In the Call channel mode, push [CALL] to cancel the mode.
2. Rotate [DIAL] to select an operating frequency or a
channel.
21
BASIC MANUAL
and the selected Memory channel
D Weather channel mode
(Selectable in only the USA version transceivers)
You can use the Weather channel mode to hear weather
broadcasts from the National Oceanographic and
Atmospheric Administration (NOAA) broadcasts.
1.
Push [QUICK].
2.
Rotate [DIAL] to select "Weather CH," then push [ï].
• The selected weather channel number ("WX-01" to "WX-10")
is displayed.
L To cancel the mode, select "Weather CH OFF" in the Quick
Menu window.
[ï]
[DIAL]
[V/M]/[CALL]
[QUICK]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Id-4100e

Table of Contents