Chapter 10
2.
Success
will appear on the above screen and the WPS LED on the router will keep on
for five minutes if the client has been successfully added to the network.
10. 7. 2. Use the PIN for Wi-Fi connections
Router's PIN is enabled by default to allow wireless devices to connect to the router
using the PIN. You can use the default one or generate a new one.
You can also enter the PIN of the device you want to connect to the Wi-Fi.
Note:
•
If you want to enable/disable the WPS feature, go to
section and tick or untick the
•
PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported
devices can connect to your router with the PIN. The default PIN is printed on the label of the router.
10. 8. Schedule Your Wireless Function
The wireless network can be automatically off at a specific time when you do not need
the wireless connection.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced
>
3. Enable
Wireless
Schedule.
4. Click
Add
to set the wireless off time. Specfiy the time period and days whenthe
wireless network will be off.
Enable
checkbox.
Wireless
>
Wireless
Schedule.
Customize Your Network Settings
Advanced
>
Wireless
>
Advanced
Settings. Locate the
WPS
54