Operating Precautions - Shindaiwa 230PH Owner's/Operator's Manual

Safety Labels
IMPORTANT!
Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.

Operating Precautions

 Always maintain the Multipurpose
Engine according to the this
owner's manual and follow
the recommended scheduled
maintenance.
 Never modify or disable any of the
unit's safety devices.
Before starting the engine, make
sure the cutter is not contacting
anything.
Always stop the engine immediately
and check for damage if you
strike a foreign object or if the unit
becomes tangled. Do not operate
with broken or damaged equipment.
 Always use genuine Shindaiwa
parts and accessories when
repairing or maintaining this unit.
 Stop the unit immediately if it
suddenly begins to vibrate or
shake. Inspect for broken, missing
or improperly installed parts or
attachments.
4
WARNING!
Use Good Judgement
 Do not operate the Multipurpose
Tool Carrier with the muffler
removed.
 Make sure there is always good
ventilation when operating the
Multipurpose Tool Carrier. Fumes
from engine exhaust can cause
serious injury or death. Never run
the engine indoors!
 Make sure there are no missing or
loose fasteners, and that the stop
switch and throttle controls are
working properly.
 Do not make unauthorized
modifications or substitutions to
the Multipurpose Engine.
 Never allow the engine to run at
high RPM without a load. Doing so
could damage the engine.
 When transporting the unit in a
vehicle, tie it down securely to
prevent damage and fuel spillage.
 Never operate power equipment
of any kind if you are tired or if you
are under the influence of alcohol,
drugs, medication or any other
substance that could affect your
ability or judgement.
 Keep the Multipurpose Engine as
clean as possible. Keep it free of
loose vegetation, mud, etc.
 Always hold the machine firmly
with both hands when cutting or
trimming, and maintain control at all
times.
 Always keep the handles clean.
 Always disconnect the spark
plug wire before performing any
maintenance work.
 Never permit a person without
training or instruction to operate this
machine.
 Keep the Multipurpose Engine as
clean as possible. Keep it free of
loose vegetation, mud, etc.