Approved Combitools; Mounting The Bike Handle - Stihl KM 85 Instruction Manual

Approved CombiTools

FS
FS
HL-0/90° HL-0°
FH
HT BC
FCB FCS
KW
KM 85, KM 85 R
The following STIHL CombiTools may
be mounted on the CombiEngine:
CombiTool Purpose
1)
FS Brushcutter with
mowing head
1) 2)
FS Brushcutter with
grass cutting bladet
2) 3)
FH Power scythe
3)
HL - 0° Hedge cutter
2) 3)
HL - 0/90° Hedge cutter
3)
HT Pole pruner
2) 3)
BC Cultivator
3)
FCB, FCS Power edger
3)
KW PowerSweep
1)
Always observe chapter "Approved
Combinations of Cutting Tool,
Deflector, Handle and Harness" in
FS CombiTool instruction manual
2)
Barrier bar must be mounted on
loop handle
3)
Unsuitable or not approved for
CombiEngines with bike handle
english / USA

Mounting the Bike Handle

6 6
5
1
4
A
2
:
Mount the bike handle (1) on the
drive tube (2) about 16" (40 cm) (A)
forward of the engine.
:
Place the clamp (3) and the handle
support (4) on the drive tube.
:
Position the bike handle (1) on the
handle support - the rubber grip
must be on the left (viewed from the
engine)
3
11