Stihl KM 85 Instruction Manual page 31

english / USA
Definitions
1. Fuel Pump
Provides additional fuel feed for a
cold start.
2. Choke Lever
Eases engine starting by enriching
mixture.
3. Carburetor Adjusting Screws
For tuning the carburetor
4. Starter Grip
The grip of the pull starter, which is
the device to start the engine.
5. Fuel Filler Cap
For closing the fuel tank.
6. Fuel Tank
For fuel mixture consisting of
gasoline and oil.
7. Muffler
(with spark arresting screen)
Reduces exhaust noises and
diverts exhaust gases away from
operator.
8. Throttle Trigger
Controls the speed of the engine.
9. Slide Control
For starting throttle, run and stop.
Keeps the throttle partially open
during starting, switches the
engine's ignition off to stop the
engine.
30
10. Throttle Trigger Interlock
Must be depressed before the
throttle trigger can be activated.
11. Bike Handle
For easy control of the machine with
both hands.
12. Handle Support
Connects the drive tube and bike
handle.
13. Throttle Cable Retainer
Secures the throttle cable to the
drive tube.
14. Carrying Ring
Connects the machine to the
harness.
15. Spark Plug Boot
Connects the spark plug to the
ignition lead.
16. Air Filter Cover
Encloses and protects the air filter.
17. Machine Support
For resting machine on the ground.
18. Wing Screw
Secures the lower part of the drive
tube (stub shaft).
19. Coupling Sleeve
Connects the drive tube to the lower
part of the drive tube (stub shaft).
20. Barrier Bar
Helps maintain clearance between
working tool and feet and legs of
operator.
21. Loop Handle
For easy control of the machine.
22. Drive Tube
Encloses and protects the drive
shaft between the engine and
gearhead.
KM 85, KM 85 R