Stihl KM 85 Instruction Manual page 13

english / USA
:
Place the clamp (5) on the handle
support.
:
Insert screws (6) in the holes and
clamp (3) and tighten them
moderately.
:
Line up the bike handle.
:
Tighten down the screws firmly.
12
11
10
7
9 8
Fitting the control handle
: Release the screw (7) and remove it
with the washer (8). The nut (9)
remains in the control handle (10).
: Push the control handle onto the
bike handle (1) - the throttle trigger
(11) must point towards the
gearhead.
:
Line up the holes (12).
:
Fit screw and washer in control
handle and tighten down firmly.
12
1
12
Fitting the throttle cable
Do not kink the throttle cable - make
sure the throttle trigger moves freely.
:
Press the throttle cable (13) into the
retainers (14).
13
14
14
13
14
KM 85, KM 85 R