D-Link DIR-608 User Manual page 46

Section 3 - Configuration
Select IPv6 In IPv4 Tunnel if you wish to configure your router to
My IPv6
Connection is: connect to your ISP using 6 to 4. 6 to 4 is an IPv6 address assignment
and automatic tunneling technology that is used to provide unicast
IPv6 connectivity between IPv6 sites and hosts across the IPv4
Internet.
6to4 Address: Displays the 6 to 4 address.
6to4 Relay:
Enter the 6 to 4 relay supplied by your ISP.
LAN IPv6 Address Settings
LAN IPv6 Address: Enter LAN (local) IPv6 address for the router.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
Select either Obtain DNS server address automatically or Use the following DNS address.
If you choose Use the following DNS address, please configure the following field:
Primary DNS Enter the primary DNS server address.
Address:
Secondary DNS Enter the secondary DNS server address.
Address:
D-Link DIR-608 User Manual
IPv6 Connection Type
6to4 Settings
IPv6 DNS Settings
6 to 4
IPv6 Connection Type:
Choose the mode to be used by the router to the IPv6
Internet.
6to4 Settings
Enter the IPv6 address information provided by your
Internet Service Provider (ISP).
LAN IPv6 Address Settings
Use this section to configure the internal network settings of
your router. If you change the LAN IPv6 Address here, you
may need to adjust your PC's network settings to access the
network again.
LAN IPv6 Link-Local
IPv6 DNS Settings
Obtain DNS server address automatically or enter a
specific DNS server address.
Secondary DNS Address:
My IPv6 Connection is: 6 to 4
6to4 Address:
6to4 Relay: 0.0.0.0
LAN IPv6 Address: xxxx::xxxx::xxxx:: 0000 ::1/64
xx00:yy11:zz22:123/64
Address:
Primary DNS Address:
▼
42